Home > Products > Heating band
| Max. element temp | 220 (428) .°C, (°F) | Dielectric strength at 20°C | 25 ASTM KV/m |
| Bending radius | ≥0.8mm | Dielectric | > 1000V/min |
| Wattage Density | ≤ 3.0 W/cm2 | Watt tolerance | ≤ ±5% |
| Insulation | > 100M ohm | Thickness | ≤0.3mm |
| Temperature Sensor | RTD / film pt100 | Thermistor / NTC | thermal switch etc |
| Adhesive backin | silicone based PSA | Acrylic based PSA | polyimide based PSA |
| Lead wires | Silicone rubber cables | Fiberglass insulated wire | different plug set / termination available |
Foil Element
Polyimide (Kapton) heaters make use of very thin (e.g. 50μm) etched metal (usually nickel based alloy) foil as resistance element. The resistance pattern to be etched is designed in CAD and transferred to the foil, which is then processed through acid spray to produce the desired resistance pattern.
Features
* Extremely thin as 0.2mm
* Extrmely light in weight
* Etched foil heating wires to improve 50-80% lifespan
* Strong Resistant to Chemical/OIl Medium
*Fast and precise heating
*Low voltage low ohm value heater film, e.g. 5V, 12V, 24V
Application
* Medical diagnostic instruments: Heat sample trays, * * * Reagent bottles, etc.
* Stabilize optoelectronic components
* Test or simulate integrated circuits
* Enable cold weather operation of outdoor electronics such as laptop, ATM, LCD's
* Protect Aircraft electronic and mechanical devices in cold weather/area.
Our friendly team would love to hear from you!
Copyright © Shenzhen Ali Brother Technology Co., Ltd. All Rights Reserved
EN
